Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

mail serveur behind cisco 877 -asa5505 how to port forward port 25??

Hi;

i have a mail server behind ASA5505 and Cisco 877, and i want to port forward the port 25, 110 to this server.

how can i do this config?? and if there is example to this config??

Thanks.                  

1 REPLY
New Member

Re: mail serveur behind cisco 877 -asa5505 how to port forward p

at router You may write next:

ip nat inside source static tcp 110 110

ip nat inside source static tcp 25 25

and, add permit rule in "in" ACL if it exsist.

What software version on ASA?

For 8.4 it is may be like this (192.168.0.10 - SMTP server and 192.168.0.20 POP3 server):

object network SNMP_SRV

host 192.168.0.10

nat (inside,outside) static interface service tcp smtp smtp

object network POP_SRV

host 192.168.0.20

nat (inside,outside) static interface service tcp pop3 pop3

object-group service POST_SMTP tcp

port-object eq smtp

object-group service POST_POP tcp

port-object eq pop3

access-list 101 extended permit tcp any object SNMP_SRV object-group POST_SMTP

access-list 101 extended permit tcp any object POP_SRV object-group POST_POP

where ACL 101 it is "in" ACL on Outside interface

------------------------------------------------------ Helping seriously ill children, all together. All information about this, is posted on my blog
480
Views
0
Helpful
1
Replies