Making a routed switch virutal interface the default SVI
I am having an issue where I am adding a catalyst switch to my ACS server for AAA authentication.
I have a catalyst with the following:
inteface vlan 174
ip address 192.168.174.1
interface vlan 199
ip address 192.168.199.1
When I setup the switch in the ACS, the ACS rejects it because it sees the traffic coming from a different SVI 2. I would like to set it up on SVI 174. My question is, how do I make the traffic source out of SVI 174?
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...