Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

maximum IOS in Cat 6500 w/ Sup 32

Hi Guys,

Any one who knows where I can find a documentation where it says the maximum images of IOS in flash of the Cat 6500 Series with Supervisor 32.

Thanks,

Marcos

3 REPLIES

Re: maximum IOS in Cat 6500 w/ Sup 32

Hi,

Sup32 info

1. DRAM

- 512 MB DRAM comes by default on the Sup32 for both the base board and MSFC2A, and both are field upgradeable to 1 GB

2. FLASH

- 256 MB is default size of the internal compact flash and is not field upgradeable.

- External compact flash is optional on Sup32. The compact flash supported at FCS are: MEM-C6K-CPTFL64M, MEM-C6K-CPTFL128M, and MEM-C6K-CPTFL256M

Well, with the maximum DRAM and FLASH that the Sup32 Supported, there is no current IOS that will exceed that requirement - even half of it.

http://www.cisco.com/en/US/products/hw/switches/ps708/products_qanda_item0900aecd801ff38a.shtml

Dandy

New Member

Re: maximum IOS in Cat 6500 w/ Sup 32

You can have as many as you want, but flash memory is limited to 256MB for on-board flash. I'm not sure if there is a size limit for the size of flash cards that the Sup32 supports.

New Member

Re: maximum IOS in Cat 6500 w/ Sup 32

Have a document it says that? I need a document shows this information but not find.

144
Views
6
Helpful
3
Replies
CreatePlease to create content