Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

ME 3400 series query

HI,

I am looking for a switch with the following requirement,

1. It should accomodate 6 GLC-FE-100LX ports and 7 10/100 ports plus one 1 Gigabit LX/LH port.

As per my knowledge the cheapest option I have to fulfill the above requirement would be a ME-3400G-12CS-A switch.

Kindly let me know if this switch could support the above port requirement as well as whether this can integrate in my environment as distribution level switch integrating with normal 3750, 4500 and 2960 switches.

Thanks and Regards

Puneet

2 REPLIES
Hall of Fame Super Silver

Re: ME 3400 series query

Hello Puneet,

support for GLC-FE-100 starts with releases 12.2(25)SEG1 and 12.2(44)SE see table4 in the following:

http://www.cisco.com/en/US/docs/interfaces_modules/transceiver_modules/compatibility/matrix/OL632702.html

for GE GLC see talbe 3 of the doc:

http://www.cisco.com/en/US/docs/interfaces_modules/transceiver_modules/compatibility/matrix/OL_6981.html#wp108834

With the right IOS image you should be fine.

You should also be able to integrate it with current switches.

Hope to help

Giuseppe

Community Member

Re: ME 3400 series query

Hello Giuseppe,

Thanks for the prompt reply.

Just to reconfirm ,

I can have 6 modules of GLC-FE-100LX and one GLC-LH-SM and 6 10/100 copper ports in single ME-3400G-12CS-A.

plus it can integrate with non metro ethernet switches without any issues.

kindly reconfirm. I am just having fear that the switch might not integrate with non metro ethernet switches.

Puneet

122
Views
0
Helpful
2
Replies
CreatePlease to create content