Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

ME3400 - MAC address on SVI

I want to know more information about the assignment of mac-address on each L3 SVI. Is there any guideline and how to show the range as it is not unique MAC address.

For example, if the MAC address of the ME3400 is 0000.0000.0001. What will be the MAC on "int vlan 1", "int vlan 100"...or "int f0/1 - no switchport.

Thanks!

1 REPLY
Hall of Fame Super Silver

Re: ME3400 - MAC address on SVI

Hello Vincent,

normally a single MAC address is used for all SVIs by a multi layer switch see the following for a C6500

Vlan1 is up, line protocol is up

Hardware is EtherSVI, address is 0018.741c.6740 (bia 0018.741c.6740)

...

Vlan606 is up, line protocol is up

Hardware is EtherSVI, address is 0018.741c.6740 (bia 0018.741c.6740)

The MAC address is taken from the block of MAC addresses you can see in the output of sh module

in some cases you may need to change the MAC address on a per SVI basis and this is possible (at least in a C6500)

Hope to help

Giuseppe

198
Views
0
Helpful
1
Replies
CreatePlease login to create content