DHCP relay not working on ME3600 when using xconnect under VLAN int
Symptoms: DHCP relay does not work on Cisco ME3600.
Conditions: This issue is observed if you configure at the same time a "ip helper-address" and an xconnect under the VLAN interface. It is observed on ME3600/ME3800 platforms running Cisco IOS Release 15.1(2)EY1 or earlier.
I also would like to point out a bug on ME3600 with ip helper.
I'm running IOS 15.2(2)S2 and all PCs behind the ME3600 passing through ip helper address to get an IP from a central DHCP server, when doing ipconfig /all on the PCs, the DHCP server address is set to the VLAN interface of the ME3600, not the DHCP server !
I've never seen that before.
All other PCs behind other L3 swithes (C3650, C3750 etc..) are showing the right IP address of the DHCP server.
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...