Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Memory in Cat65K

How can I check the memory usage in Cat6500.

Is it show memory. What is the difference between process memory and I/O memory.

3 REPLIES
Blue

Re: Memory in Cat65K

That's the correct command. Or "show proc mem".

I/O memory refers to the buffers available on the interfaces.

Process memory is an indication of how much dynamic memory each specific process is utilizing.

New Member

Re: Memory in Cat65K

With hardware with following specs

MEM-S2-512MB Catalyst 6500 512MB DRAM on the Supervisor (SUP2 or SUP720)

MEM-MSFC2-512MB Catalyst 6500 512MB DRAM on the MSFC2 or SUP720 MSFC3

how can I check these values in the IOS. Do they relate to processor and I/O memory.

Re: Memory in Cat65K

In IOS,

"show ver" will tell you MSFC memory size.

"remote command switch show ver" will tell you memory size on SP.

141
Views
0
Helpful
3
Replies