Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

memory upgrade for SUP2

Hi,

I have a SUP2 module running older native IOS, the current installed DRAM for both SUP2 & MSFC2 is 128MB. If I want to upgrade to a IOS that required 256MB DRAM. Do I need to upgrade MSFC2 DRAM only, or need to upgrade both SUP2 & MSFC2 DRAM to 256MB? If upgrade to 512MB, are the part number MEM-S2-512MB,MEM-MSFC2-512MB correct?

Best Regards,

Jackson Ku

2 REPLIES

Re: memory upgrade for SUP2

Jack,

You need to upgrade both hardware, here is the part number

MEM-MSFC2-512MB=

Here is the link,

http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/hardware/Config_Notes/78_6953.html

http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/hardware/Config_Notes/78_12693.html

Regards,

~JG

Please rate helpful posts

Bronze
151
Views
0
Helpful
2
Replies