We got one cloud of metro Ethernet consist of 2 unit of 7613 as NPE. Both have serve 5 customers and each of customers are connected via UPEs in separate ring to the both NPE. The issue is both NPE are running MSTP.
For instance 0 = all vlans
instance 1 = vlan 100
instance 2 = vlan 200
All UPEs except 1 ring of customers are using PVST.
That 1 ring customer are using MSTP same like both NPEs.
It happens that trunk between the NPE_A & NPE_B are disconnected.
All customers UPE that running PVST are experience port status "BLK" at the each ring .
Except the one UPE that running MSTP, all UPE in the ring are forwarding.
Why this issue happen in customer that tunning PVST?
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...