Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

MIB Extension - Cisco Catalyst 2960 -

Hi everyone, 

I would like to monitor a cisco catalyst 2960 provided with IOS v15. I accessed mib files and I found that many component are disabled or have no entry in it (check attachment).

So my question is : Can I extend the mib to support more OIDs ? and if so, I'll be glad if you give a tutorial or example !

Thank you so much.


Best regards,

1 ACCEPTED SOLUTION

Accepted Solutions

Your ipRouteTable and EGP

Your ipRouteTable and EGP MIBs are disabled because the 2960 is a layer-2 switch only, so it does not have any ip routing or EGP.  The MIBs will be disabled for features your switch does not support.

Kevin Dorrell

Luxembourg

 

1 REPLY

Your ipRouteTable and EGP

Your ipRouteTable and EGP MIBs are disabled because the 2960 is a layer-2 switch only, so it does not have any ip routing or EGP.  The MIBs will be disabled for features your switch does not support.

Kevin Dorrell

Luxembourg

 

55
Views
0
Helpful
1
Replies
CreatePlease login to create content