Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

microflow based on source mask and NDE on the same SVI

We are going to do microflow based on source mask only for UBRL based on the access-list matches the source address.

However, we understand that you cannot apply NDE (netflow data export) together with microflow based on source mask only on the same SVI . Is this due to hardware limitation?

We need to do netflow export to a netflow collector to see the top usage user traffic. With only the source, a lot of information is lost. The conversation obtain see source address when issue show ip cache flow as the microflow mask is based on only source mask.

Can anyone advise how can we enabled microflow based on source mask (UBRL) and at the same time able to pipe the full conversation information (consisting of source ip, source port, destination ip, destination port, etc) to the netflow collector to see the full flow. Currently, we can only see the source information.

343
Views
0
Helpful
0
Replies
CreatePlease to create content