Moving few vlans from current switch to other switches. Do you want to extend the same vlans across the new switches? Do you want to have totally different vlans on new switches or you want some of the vlans that are running in the prsent setup to run on the new switches? Ifyes, then what all other vlans you will run on the new switches, will they be totally different?
thank yoou for your reply. I want some of the vlans that are running in the prsent setup to run on the new switches. Then all other vlans you will run on the old switches, It will load balance the vlan ?
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...