Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Migrating 6509 from CATOS to IOS

Folks,

I have two 6509 CatOS switch with IOS running in MSFC. I tried to install WiSM in my network but later found that CatOs doesn't support WiSM. So, I am planning to upgrade the switch to Native mode of operation ( IOS both on switch and MSFC) and will work on Wism. I just like to have you experience in the process. What are the steps, considerations and requirements to this migration with no ( I doubt ??) or less downtime.

I would appreciate if you have any idea or experience to share on this regards.

3 REPLIES
New Member

Re: Migrating 6509 from CATOS to IOS

Hi,

There is a good Cisco link to answer all your questions including the migration steps:

http://www.cisco.com/en/US/products/hw/switches/ps708/products_tech_note09186a0080816fbc.shtml

P.S> Please rate the post if you find it useful.

HTH,

Sameer

New Member

Re: Migrating 6509 from CATOS to IOS

Thanks guys

Let me go through it and get back to you guys with my concerns.

subharose

119
Views
0
Helpful
3
Replies