I have two live Catalyst 6513 at the core/distribution layer. They are hybrid models [CatOS 8.3(4) and MSFC IOS 12.2(17d)SXB6].
Installed modules are:
- WS-SUP720-BASE (redundant)
I'm planning the migration of both switches to Native IOS 12.2(18)SFX10. Are there any issues I need to watch out for? The migration strategy will involve migration of one box first, verify network operation is okay, then proceed to migrate the other box. I'm most concerned with unexpected interoperability issue.
In current setup, both core switches are in VTP server mode. All other switches are clients. All trunks are 802.1Q. Spanning tree is PVST+. FWSM is in routed multiple security context mode.
I'm using the EDI tool to help with the CatOS command conversion.
Re: Migrating Catalyst 6513 from CatOS to Native IOS
To add on, I forgot to mention that after the first box is converted, I will configure it in VTP client mode to synchronize the VLAN from the second box. Then reconfigure it to VTP server. I have heard that this action may result in the Native IOS switch not able to create new VLANs.
Kindly advise if this is true and what is the best strategy to do it.
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.