cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
457
Views
5
Helpful
3
Replies

Migration from WS-C3560 to WS-C2960X

Maurycy
Level 1
Level 1

Hi,

Im planning a migration from this switch:
https://www.amazon.com/Cisco-WS-C3560-24TS-S-Catalyst-3560-24TS-Switch/dp/B0007VOF0I 
to somthing newer, like this:
https://www.cisco.com/c/en/us/support/switches/catalyst-2960x-24ts-l-switch/model.html 

My question is, according to various research i'm doing currently, can I upload configuration from older to newer?

best regards,

Maurycy

1 Accepted Solution

Accepted Solutions

Hi Maurycy,

 

Yes, you can upload the configuration from older to newer switch.

But you have to take care of few things, like boot system command should not be there in old config.

 

It will be good if you will do copy and paste the configuration from old switch configuration to new switch, in this way you can remove the things which are not required for the new switch.

Spooster IT Services Team

View solution in original post

3 Replies 3

Hi Maurycy,

 

Yes, you can upload the configuration from older to newer switch.

But you have to take care of few things, like boot system command should not be there in old config.

 

It will be good if you will do copy and paste the configuration from old switch configuration to new switch, in this way you can remove the things which are not required for the new switch.

Spooster IT Services Team

Thank you!

Thank you for the rating.

Spooster IT Services Team
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Review Cisco Networking products for a $25 gift card