Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Minor error in 6509 Sup2t module 5

Hi Guys,

I have two core switches 6509 in my project and after one year i got this minor error in the core sw 2:

Core_SW#show module switch 2
Switch Number: 2 Role: Virtual Switch Standby
---------------------- -----------------------------
Mod Ports Card Type Model Serial No.
--- ----- -------------------------------------- ------------------ -----------
1 48 CEF720 48 port 10/100/1000mb Ethernet WS-X6848-GE-TX SAL1639NESZ
2 16 CEF720 16 port 10GE WS-X6816-10GE SAL1637MB7Y
3 24 CEF720 24 port 1000mb SFP WS-X6824-SFP SAL1640NTFJ
4 16 CEF720 16 port 10GE WS-X6816-10GE SAL1639NLPV
5 5 Supervisor Engine 2T 10GE w/ CTS (Hot) VS-SUP2T-10G SAL1639NJ7U

Mod MAC addresses Hw Fw Sw Status
--- ---------------------------------- ------ ------------ ------------ -------
1 6073.5cd9.8ad0 to 6073.5cd9.8aff 1.0 12.2(18r)S1 15.0(1)SY2 Ok
2 001f.6ca4.7340 to 001f.6ca4.734f 1.1 12.2(18r)S1 15.0(1)SY2 Ok
3 6073.5cd9.a920 to 6073.5cd9.a937 1.0 12.2(18r)S1 15.0(1)SY2 Ok
4 30f7.0d7f.3fe8 to 30f7.0d7f.3ff7 1.1 12.2(18r)S1 15.0(1)SY2 Ok
5 e05f.b911.3921 to e05f.b911.3928 1.3 12.2(50r)SYS 15.0(1)SY2 Ok

Mod Sub-Module Model Serial Hw Status
---- --------------------------- ------------------ ----------- ------- -------
1 Distributed Forwarding Card WS-F6K-DFC4-A SAL1639NFVD 1.2 Ok
2 Distributed Forwarding Card WS-F6K-DFC4-E SAL1637MHUN 1.2 Ok
3 Distributed Forwarding Card WS-F6K-DFC4-A SAL1640NT12 1.2 Ok
4 Distributed Forwarding Card WS-F6K-DFC4-E SAL1640NQK6 1.2 Ok
5 Policy Feature Card 4 VS-F6K-PFC4 SAL1640NMXT 1.2 Ok
5 CPU Daughterboard VS-F6K-MSFC5 SAL1639NLK6 1.4 Ok

Mod Online Diag Status
---- -------------------
1 Pass
2 Pass
3 Pass
4 Pass
5 Minor Error

As you see minor Error in online diag status! Is it critical and will make problem in network? and how to solve it! I heard that can be solved by hard reset of sup2t! how to do it?

Thanks

Mohammad Saeed

14 REPLIES
Hall of Fame Super Gold

Post the complete output to

Post the complete output to the command "sh version". 

You might want to consider upgrading the IOS.  It's old.

New Member

Core_SW#Core_SW#show

Core_SW#
Core_SW#show versi
Core_SW#show version
Cisco IOS Software, s2t54 Software (s2t54-IPBASEK9-M), Version 15.0(1)SY2, RELEASE SOFTWARE (fc4)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2012 by Cisco Systems, Inc.
Compiled Tue 10-Jul-12 13:35 by prod_rel_team

ROM: System Bootstrap, Version 12.2(50r)SYS2, RELEASE SOFTWARE (fc1)

Core_SW uptime is 1 year, 39 weeks, 4 days, 1 hour, 16 minutes
Uptime for this control processor is 1 year, 1 week, 3 days, 17 hours, 6 minutes
System returned to ROM by Stateful Switchover at 19:53:57 ksa Sat Apr 9 2016
System restarted at 19:53:57 ksa Sat Apr 9 2016
System image file is "bootdisk:s2t54-ipbasek9-mz.SPA.150-1.SY2.bin"
Last reload reason: address error at PC 0x5DF79F0, address 0x5DF79F0

This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to
export@cisco.com.

cisco WS-C6509-E (M8572) processor (revision ) with 1769472K/262144K bytes of memory.
Processor board ID SMC1636001Q
CPU: MPC8572_E, Version: 2.2, (0x80E80022)
CORE: E500, Version: 3.0, (0x80210030)
CPU:1500MHz, CCB:600MHz, DDR:600MHz
L1: D-cache 32 kB enabled
I-cache 32 kB enabled

Last reset from s/w reset
22 Virtual Ethernet interfaces
150 Gigabit Ethernet interfaces
68 Ten Gigabit Ethernet interfaces
2543K bytes of non-volatile configuration memory.

Configuration register is 0x2102

Core_SW#

Hall of Fame Super Gold

Last reload reason: address

Last reload reason: address error at PC 0x5DF79F0, address 0x5DF79F0

Ok, this doesn't look good. 

May I request if you can also post the complete output to the command "sh log"?

New Member

Core_SW#show logCore_SW#show

Core_SW#show log
Core_SW#show log
Syslog logging: enabled (0 messages dropped, 18 messages rate-limited, 6 flushes, 0 overruns, xml disabled, filtering disabled)

No Active Message Discriminator.

No Inactive Message Discriminator.


Console logging: level debugging, 787 messages logged, xml disabled,
filtering disabled
Monitor logging: level debugging, 1222 messages logged, xml disabled,
filtering disabled
Logging to: tty1(783)
Buffer logging: level debugging, 783 messages logged, xml disabled,
filtering disabled
Exception Logging: size (4096 bytes)
Count and timestamp logging messages: disabled
Persistent logging: disabled
Trap logging: level informational, 249 message lines logged

Log Buffer (8192 bytes):
20 10:31:11.576: FEC: pagp_switch_is_in_port_channel: Te1/2/1 is part of agport
Apr 20 10:31:11.576: FEC: pagp_switch_is_in_port_channel: Te1/2/2 is part of agport
Apr 20 10:31:11.576: FEC: pagp_switch_is_in_port_channel: Te1/2/3 is part of agport
Apr 20 10:31:11.576: FEC: pagp_switch_is_in_port_channel: Te1/2/4 is part of agport
Apr 20 10:31:11.576: FEC: pagp_switch_is_in_port_channel: Te1/2/5 is part of agport
Apr 20 10:31:11.576: FEC: pagp_switch_is_in_port_channel: Te1/2/6 is part of agport
Apr 20 10:31:11.576: FEC: pagp_switch_is_in_port_channel: Te1/2/7 is part of agport
Apr 20 10:31:11.576: FEC: pagp_switch_is_in_port_channel: Te1/2/8 is part of agport
Apr 20 10:31:11.576: FEC: pagp_switch_is_in_port_channel: Te1/2/9 is part of agport
Apr 20 10:31:11.576: FEC: pagp_switch_is_in_port_channel: Te1/2/10 is part of agport
Apr 20 10:31:11.576: FEC: pagp_switch_is_in_port_channel: Te1/2/11 is part of agport
Apr 20 10:31:11.576: FEC: pagp_switch_is_in_port_channel: Te1/2/12 is part of agport
Apr 20 10:31:11.576: FEC: pagp_switch_is_in_port_channel: Te1/2/13 is part of agport
Apr 20 10:31:11.576: FEC: pagp_switch_is_in_port_channel: Te1/2/14 is part of agport
Apr 20 10:31:11.576: FEC: pagp_switch_is_in_port_channel: Te1/2/15 is part of agport
Apr 20 10:31:11.576: FEC: pagp_switch_is_in_port_channel: Te1/2/16 is part of agport
Apr 20 10:31:11.576: FEC: pagp_switch_is_in_port_channel: Gi1/1/40 is part of agport
Apr 20 10:31:11.576: FEC: pagp_switch_is_in_port_channel: Te2/2/1 is part of agport
Apr 20 10:31:11.592: FEC: pagp_switch_is_in_port_channel: Te1/2/5 is part of agport
Apr 20 10:31:11.840: FEC: pagp_switch_is_in_port_channel: Te2/2/5 is part of agport
Apr 20 10:31:11.944: FEC: pagp_switch_is_in_port_channel: Te2/2/13 is part of agport
Apr 20 10:31:12.088: FEC: pagp_switch_is_in_port_channel: Te1/2/5 is part of agport
Apr 20 10:31:12.148: FEC: pagp_switch_is_in_port_channel: Te1/5/5 is part of agport
Apr 20 10:31:12.204: FEC: pagp_switch_is_in_port_channel: Te2/2/2 is part of agport
Apr 20 10:31:12.204: FEC: pagp_switch_is_in_port_channel: Te2/2/3 is part of agport
Apr 20 10:31:12.204: FEC: pagp_switch_is_in_port_channel: Te2/2/4 is part of agport
Apr 20 10:31:12.512: FEC: pagp_switch_is_in_port_channel: Te2/2/16 is part of agport
Apr 20 10:31:12.604: FEC: pagp_switch_is_in_port_channel: Te2/2/5 is part of agport
Apr 20 10:31:12.604: FEC: pagp_switch_is_in_port_channel: Te2/2/7 is part of agport
Apr 20 10:31:12.604: FEC: pagp_switch_is_in_port_channel: Te2/2/8 is part of agport
Apr 20 10:31:12.704: FEC: pagp_switch_is_in_port_channel: Te2/2/15 is part of agport
Apr 20 10:31:12.820: FEC: pagp_switch_is_in_port_channel: Te1/2/2 is part of agport
Apr 20 10:31:12.904: FEC: pagp_switch_is_in_port_channel: Te2/2/9 is part of agport
Apr 20 10:31:12.904: FEC: pagp_switch_is_in_port_channel: Te2/2/10 is part of agport
Apr 20 10:31:12.904: FEC: pagp_switch_is_in_port_channel: Te2/2/11 is part of agport
Apr 20 10:31:13.032: FEC: pagp_switch_is_in_port_channel: Te2/2/4 is part of agport
Apr 20 10:31:13.412: FEC: pagp_switch_is_in_port_channel: Te2/4/2 is part of agport
Apr 20 10:31:13.436: FEC: pagp_switch_is_in_port_channel: Te2/2/6 is part of agport
Apr 20 10:31:13.436: FEC: pagp_switch_is_in_port_channel: Te2/2/12 is part of agport
Apr 20 10:31:13.436: FEC: pagp_switch_is_in_port_channel: Te2/2/13 is part of agport
Apr 20 10:31:13.436: FEC: pagp_switch_is_in_port_channel: Te2/2/14 is part of agport
Apr 20 10:31:13.436: FEC: pagp_switch_is_in_port_channel: Te2/2/15 is part of agport
Apr 20 10:31:13.436: FEC: pagp_switch_is_in_port_channel: Te2/2/16 is part of agport
Apr 20 10:31:13.592: FEC: pagp_switch_is_in_port_channel: Te1/4/10 is part of agport
Apr 20 10:31:13.668: FEC: pagp_switch_is_in_port_channel: Te1/2/14 is part of agport
Apr 20 10:31:13.820: FEC: pagp_switch_is_in_port_channel: Te2/2/11 is part of agport
Apr 20 10:31:13.936: FEC: pagp_switch_is_in_port_channel: Te2/4/15 is part of agport
Apr 20 10:31:14.076: FEC: pagp_switch_is_in_port_channel: Gi2/3/3 is part of agport
Apr 20 10:31:14.432: FEC: pagp_switch_is_in_port_channel: Te2/4/1 is part of agport
Apr 20 10:31:14.544: FEC: pagp_switch_is_in_port_channel: Gi2/1/13 is part of agport
Apr 20 10:31:14.596: FEC: pagp_switch_is_in_port_channel: Gi2/3/3 is part of agport
Apr 20 10:31:14.780: FEC: pagp_switch_is_in_port_channel: Te1/4/10 is part of agport
Apr 20 10:31:14.788: FEC: pagp_switch_is_in_port_channel: Te2/2/12 is part of agport
Apr 20 10:31:15.280: FEC: pagp_switch_is_in_port_channel: Te2/2/11 is part of agport
Apr 20 10:31:15.352: FEC: pagp_switch_is_in_port_channel: Te2/4/1 is part of agport
Apr 20 10:31:15.820: FEC: pagp_switch_is_in_port_channel: Te2/2/9 is part of agport
Apr 20 10:31:15.860: FEC: pagp_switch_is_in_port_channel: Te2/5/5 is part of agport
Apr 20 10:31:16.280: FEC: pagp_switch_is_in_port_channel: Te2/4/3 is part of agport
Apr 20 10:31:17.348: FEC: pagp_switch_is_in_port_channel: Te2/4/4 is part of agport
Apr 20 10:31:17.436: FEC: pagp_switch_is_in_port_channel: Te2/4/10 is part of agport
Apr 20 10:31:17.524: FEC: pagp_switch_is_in_port_channel: Te1/2/6 is part of agport
Apr 20 10:31:17.528: FEC: pagp_switch_is_in_port_channel: Gi2/1/47 is part of agport
Apr 20 10:31:17.796: FEC: pagp_switch_is_in_port_channel: Te1/2/7 is part of agport
Apr 20 10:31:17.944: FEC: pagp_switch_is_in_port_channel: Te1/5/4 is part of agport
Apr 20 10:31:18.064: FEC: pagp_switch_is_in_port_channel: Te2/2/5 is part of agport
Apr 20 10:31:18.180: FEC: pagp_switch_is_in_port_channel: Te2/4/6 is part of agport
Apr 20 10:31:18.448: FEC: pagp_switch_is_in_port_channel: Te1/4/2 is part of agport
Apr 20 10:31:18.988: FEC: pagp_switch_is_in_port_channel: Gi1/3/2 is part of agport
Apr 20 10:31:18.988: FEC: pagp_switch_is_in_port_channel: Te2/4/13 is part of agport
Apr 20 10:31:19.012: FEC: pagp_switch_is_in_port_channel: Te2/4/8 is part of agport
Apr 20 10:31:19.088: FEC: pagp_switch_is_in_port_channel: Te2/5/4 is part of agport
Apr 20 10:31:19.228: FEC: pagp_switch_is_in_port_channel: Te2/4/8 is part of agport
Apr 20 10:31:19.240: FEC: pagp_switch_is_in_port_channel: Te2/4/15 is part of agport
Apr 20 10:31:19.440: FEC: pagp_switch_is_in_port_channel: Te1/4/8 is part of agport
Apr 20 10:31:20.392: FEC: pagp_switch_is_in_port_channel: Gi2/1/40 is part of agport
Apr 20 10:31:20.544: FEC: pagp_switch_is_in_port_channel: Te2/4/1 is part of agport
Apr 20 10:31:20.564: FEC: pagp_switch_is_in_port_channel: Te1/2/10 is part of agport
Apr 20 10:31:20.968: FEC: pagp_switch_is_in_port_channel: Te2/4/2 is part of agport
Apr 20 10:31:21.148: FEC: pagp_switch_is_in_port_channel: Te2/4/3 is part of agport
Apr 20 10:31:21.148: FEC: pagp_switch_is_in_port_channel: Te2/4/4 is part of agport
Apr 20 10:31:21.148: FEC: pagp_switch_is_in_port_channel: Te2/4/6 is part of agport
Apr 20 10:31:21.148: FEC: pagp_switch_is_in_port_channel: Te2/4/8 is part of agport
Apr 20 10:31:21.796: FEC: pagp_switch_is_in_port_channel: Te2/4/10 is part of agport
Apr 20 10:31:21.796: FEC: pagp_switch_is_in_port_channel: Te2/4/13 is part of agport
Apr 20 10:31:21.796: FEC: pagp_switch_is_in_port_channel: Te2/4/15 is part of agport
Apr 20 10:31:21.920: FEC: pagp_switch_is_in_port_channel: Te1/4/8 is part of agport
Apr 20 10:31:22.348: FEC: pagp_switch_is_in_port_channel: Te1/2/6 is part of agport
Apr 20 10:31:22.576: FEC: pagp_switch_is_in_port_channel: Gi1/1/13 is part of agport
Apr 20 10:31:22.680: FEC: pagp_switch_is_in_port_channel: Te1/4/1 is part of agport
Apr 20 10:31:22.692: FEC: pagp_switch_is_in_port_channel: Te2/4/10 is part of agport
Apr 20 10:31:22.704: FEC: pagp_switch_is_in_port_channel: Gi2/3/3 is part of agport
Apr 20 10:31:22.772: FEC: pagp_switch_is_in_port_channel: Te2/4/15 is part of agport
Apr 20 10:31:22.804: FEC: pagp_switch_is_in_port_channel: Gi2/3/2 is part of agport
Apr 20 10:31:23.468: FEC: pagp_switch_is_in_port_channel: Te2/2/8 is part of agport
Apr 20 10:31:23.656: FEC: pagp_switch_is_in_port_channel: Te2/4/10 is part of agport
Apr 20 10:31:23.684: FEC: pagp_switch_is_in_port_channel: Te1/4/3 is part of agport
Apr 20 13:04:49.232: %DHCPD-4-PING_CONFLICT: DHCP address conflict: server pinged 10.60.4.9.
Core_SW#

these logs because I was using etherchannel debugging for troubleshooting!

Hall of Fame Super Gold

The output to the "sh logs"

The output to the "sh logs" didn't help.  

My only recommendation is to upgrade the IOS.

New Member

Which one you recommend ?

Which one you recommend ?

Thanks,

Hall of Fame Super Gold

Well, you have two 10 Gbps

Well, you have two 10 Gbps line cards and there have been several known bugs involving high CPU due to SLCP process (CSCur96442, CSCun45870,   CSCuv89092, CSCsz52301).  

Currently, I'm using 15.4(1)SY1.

New Member

I have IOS ipbase what if I

I have IOS ipbase what if I use ipservice or any ios is not ipbase? Is it problem?

Hall of Fame Super Gold

You must use the same feature

You must use the same feature set.  

New Member

But the Switch 1 is OK no

But the Switch 1 is OK no failure issue!

Minor Errors can be caused by

Minor Errors can be caused by temperature issues (what does "show environment alarm" output?).

Also, look for "F" (Failed) test results in "show diagnostic result module 5".

New Member

Core_SW#show diagnostic


Core_SW#show diagnostic result switch 2 module 5

Current bootup diagnostic level: minimal

Switch 2 Module 5: Supervisor Engine 2T 10GE w/ CTS (Hot) SerialNo : SAL1639NJ7U

Overall Diagnostic Result for Switch 2 Module 5 : MINOR ERROR
Diagnostic level at card bootup: minimal

Test results: (. = Pass, F = Fail, U = Untested)

1) TestTransceiverIntegrity:

Port 1 2 3 4 5
-------------------
U U U . .


2) TestLoopback:

Port 1 2 3 4 5
-------------------
. . . U U


3) TestVSActiveToStandbyLoopback ---> .
4) TestL2CTSLoopback:

Port 1 2 3 4 5
-------------------
. . . U U


5) TestL3CTSLoopback:

Port 1 2 3 4 5
-------------------
. . . U U


6) TestScratchRegister -------------> .
7) TestNewIndexLearn ---------------> .
8) TestDontConditionalLearn --------> .
9) TestBpduTrap --------------------> .
10) TestMatchCapture ----------------> .
11) TestProtocolMatchChannel --------> .
12) TestPortSecurity ----------------> .
13) TestIPv4FibShortcut -------------> .
14) TestL3Capture2 ------------------> .
15) TestIPv6FibShortcut -------------> .
16) TestMPLSFibShortcut -------------> .
17) TestNATFibShortcut --------------> .
18) TestAclPermit -------------------> .
19) TestAclDeny ---------------------> .
20) TestAclRedirect -----------------> .
21) TestRBAcl -----------------------> .
22) TestQos -------------------------> .
23) TestDQUP ------------------------> .
24) TestL3VlanMet -------------------> .
25) TestIngressSpan -----------------> .
26) TestEgressSpan ------------------> .
27) TestNetflowShortcut -------------> .
28) TestInbandEdit ------------------> .
29) TestFabricInternalSnake ---------> U
30) TestFabricExternalSnake ---------> .
31) TestFabricVlanLoopback ----------> .
32) TestTrafficStress ---------------> U
33) TestL3TcamMonitoring ------------> .
34) TestFibTcam ---------------------> U
35) TestAclQosTcam ------------------> U
36) TestEarlMemOnBootup -------------> .
37) TestAsicMemory ------------------> U
38) ScheduleSwitchover --------------> U
39) TestFirmwareDiagStatus ----------> .
40) TestAsicSync --------------------> .
41) TestUnusedPortLoopback:

Port 1 2 3 4 5
-------------------
U . . U U


42) TestNonDisruptiveLoopback:

Port 1 2 3 4 5
-------------------
U U U U U


43) TestFabricFlowControlStatus -----> .
44) TestPortTxMonitoring:

Port 1 2 3 4 5
-------------------
U U U . .


45) TestOBFL ------------------------> .
46) TestCFRW:

Device 1
---------
U


47) TestLtlFpoeMemoryConsistency ----> .
48) TestErrorCounterMonitor ---------> .
49) TestVslBridgeLink ---------------> .
50) TestVslLocalLoopback:

Port 1 2 3 4 5
-------------------
U U U . .


51) TestVslStatus:

Port 1 2 3 4 5
-------------------
U U U . .


52) TestEARLInternalTables ----------> .
53) TestNVRAMBatteryMonitor ---------> F
54) TestMediaLoopback:

Port 1 2 3 4 5
-------------------
. . . U U


55) TestMicroburst:

Port 1 2 3 4 5
-------------------
. . . . .

Core_SW#

I got this failed: 53) TestNVRAMBatteryMonitor ---------> F ??!!

Maybe your SUP hit this bug:

Maybe your SUP hit this bug: https://quickview.cloudapps.cisco.com/quickview/bug/CSCub30570 (also marked as correct answer here: https://supportforums.cisco.com/discussion/11874466/sup2t-what-function-nvram-battery )...

I also found this (as Leo said, your IOS is quite old - it may be worth trying a newer one): https://quickview.cloudapps.cisco.com/quickview/bug/CSCuc07269

New Member

Hi Lulian! Thanks for you and

Hi Lulian! Thanks for you and for Leo. I will try tomorrow to check first solution by resetting the sup and if didn't solved I will try to update but if the ver is old why SW1 is OK? 

May be need resetting !

20
Views
0
Helpful
14
Replies