I am receiving a PPPoEoQinQ mirrored traffic from another Huawei switch to 3560G switch. I am able to see this traffic on 3560G port. When I mirror this traffic (SPAN Configuration) to destination port, the traffic is zero on destination port. i.e I am not able to mirror this traffic. Where is the limitation. When the traffic is received as normal L3 packets the 3560G mirrors it and same traffic as available on destination port.
For local SPAN, if the encapsulation replicate keywords are specified for the destination port, these packets appear with the original encapsulation (untagged, ISL, or 802.1Q). If these keywords are not specified, packets appear in the untagged format. Therefore, the output of a local SPAN session with encapsulation replicate enabled can contain a mixture of untagged, 802.1Q, or ISL tagged packets
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.