mix etherchannel

[770801tvdhaar]

Hi, would like to know if I can create an etherchannel interface on mixed interface types like 1G ethernet utp and 1G singlemode or multimode ports for cross card redundencies

[massimiliano.serafino]

Hi,

Look at http://www.cisco.com/en/US/tech/tk389/tk213/technologies_tech_note09186a0080094646.shtml

I hope this helps.

Best regards.

Massimiliano.

[770801tvdhaar]

Thank you, the answer to my question is yes you can mix copper and fiber to create an etherchannel port

Tyrone