Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Mixing 3750G with 3750X

Hello, i have a stack of :

1x WS-C3750G-48TS-S and 1x WS-C3750G-24TS-1U, Can I stack 1x 3750X-12S so i can have 10G uplinks?

TIA, Nicos Nicolaides
2 REPLIES
Hall of Fame Super Gold

Mixing 3750G with 3750X

Yes you can.

Same rules:

1.  Entire stack must have the same IOS version; and

2.  Entire stack must have the same Feature Set.

Super Bronze

Re: Mixing 3750G with 3750X

Disclaimer

The   Author of this posting offers the information contained within this   posting without consideration and with the reader's understanding that   there's no implied or expressed suitability or fitness for any purpose.   Information provided is for informational purposes only and should not   be construed as rendering professional advice of any kind. Usage of  this  posting's information is solely at reader's own risk.

Liability Disclaimer

In   no event shall Author be liable for any damages whatsoever (including,   without limitation, damages for loss of use, data or profit) arising  out  of the use or inability to use the posting's information even if  Author  has been advised of the possibility of such damage.

Posting

Yes you can, although your 3750X gives up some of its StackWisePlus features.

Leo notes having same IOS version and feature set.  Actually what Leo is saying isn't always required in all situations, but using same IOS version is a really, really good idea.  Having the same feature set makes stack management easier, but considering the extra licensing costs for some feature sets, you might want to determine what you really need vs. your requirements.

126
Views
0
Helpful
2
Replies
CreatePlease to create content