cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
878
Views
0
Helpful
0
Replies

MLS QOS aggregate-police not work in 3750G Switch.

csawest.dc
Level 3
Level 3

Dear Experts,

I am using   WS-3750G-12S-S switch,  but i am not able to restrict bandwidth on gigabit interface which is i have to required as per our client .

I need bandwidth restrict on interface in cisco 3750-12S-S switch. e.g ( interface gig1/0/1 bandwitch restrict 2 mb , int gig 1/0/2 bandwitch restirt 1 mb)

please see my bellow config of msl qos aggregate police but it's not work , not restrict on interface which is i have required on per interface.

I have configured in 3750G 12S-12 switch, please see as bellow , but it's not work , bandwidth not restrict which is i have to conigrue and apply on interface .

Switch(config)# access-list 1 permit 120.233.72.0 0.0.3.255
Switch(config)# access-list 2 permit 120.233.72.34
Switch(config)# mls qos aggregate-police modest 512000 64000 exceed-action
policed-dscp-transmit
Switch(config)# class-map ipclass1
Switch(config-cmap)# match access-group 1
Switch(config-cmap)# exit
Switch(config)# class-map modest1
Switch(config-cmap)# match access-group 2
Switch(config-cmap)# exit
Switch(config)# policy-map modest-aggflow1
Switch(config-pmap)# class ipclass1
Switch(config-pmap-c)# trust dscp
Switch(config-pmap-c)# police aggregate modest
Switch(config-pmap-c)# exit
Switch(config-pmap)# class modest1
Switch(config-pmap-c)# set ip dscp 56
Switch(config-pmap-c)# police aggregate modest
Switch(config-pmap-c)# exit
Switch(config-pmap)# exit
Switch(config)# interface gigabitethernet2/0/1
Switch(config-if)# service-policy input modest-aggflow1
Switch(config-if)# exit

But it's not work bandwidth not restrict on interface .

So please give me soluction how can i resctrict per port in 3750G switch.

Thanks in ADV.

Vaib...

0 Replies 0
Review Cisco Networking products for a $25 gift card