Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

mls rate-limit all ttl-failure

Hello,

   Could some one  let  me know the  real usuage of the below given command and how it works for a 6500 chasis

mls rate-limit all ttl-failure 2500 10

Cheers

Ajai

2 REPLIES

Re: mls rate-limit all ttl-failure

Hello,

   Could some one  let  me know the  real usuage of the below given command and how it works for a 6500 chasis

mls rate-limit all ttl-failure 2500 10

Cheers

Ajai

Hi Ajai,

Supervisor 720 module have hardware that can be used to limit how often the CPU will be interrupted by packets with expiring TTL. This example shows how to enable the hardware rate limiter and check its operation:

Router#mls rate-limit all ttl-failure 500 100
Router#show mls rate-limit

Hope to Help !!

Ganesh.H

Remember to rate the helpful post

New Member

Re: mls rate-limit all ttl-failure

but will this command be of any use  if there are packets that are hitting the  6500 with a ttl of  1 .I am  trying to  block the packets that  hit the  6500 with a ttl of 1 ..

Ajai

1786
Views
0
Helpful
2
Replies