Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

%MLSCEF-SP-7-SHADOW_SSRAM_INCONSISTENCY error


Hi,

I am getting the below error on a Cisco6509 Switch version c6sup22-jk2sv-mz.121-26.E1.bin.  I have two WS-X6K-S2U-MSFC2 in Standby Active mode, but I am not sure from which card the errors are coming.  What does the error mean and is there a way to find out from which cards it is originating?

%MLSCEF-SP-7-SHADOW_SSRAM_INCONSISTENCY: FIB SSRAM Mismatch for Index: 98496
Expected: 1FFFF   , Hardware: D01FFFF

Thanks

Nzumba


1 REPLY
Hall of Fame Super Silver

Re: %MLSCEF-SP-7-SHADOW_SSRAM_INCONSISTENCY error

Hello Nzumba,

the error should come from active supervisor

%MLSCEF-SP-7-SHADOW_SSRAM_INCONSISTENCY: FIB SSRAM Mismatch for Index:  98496
Expected: 1FFFF   , Hardware: D01FFFF

because facility code is SP and not something else like SBYSP

see

http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/ios/12.1E/native/system/messages/edesc.html

the nearest message is:

http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/ios/12.1E/native/system/messages/emsg.html#wp1043580

note:

given the low level of severity 7 this is just a notification and should not take any corrective action.

>> Recommended Action   This message is for debugging purposes.

Hope to help

Giuseppe

530
Views
0
Helpful
1
Replies