There is a feature introduced in 12.2x code Configuration Change Notification and Logging where it allows to record all commands entered in configuration mode that can also be sent to syslog server as well, this feature works great, any command entered in config mode will be recorded saved in router archive defined buffer as well as sent to syslog server.
Check Cisco feature navigator in the event your IOS does not have that feature and inquiry for your platform type, or see more details in above link given Table 1 Feature Information for Configuration Change Notification and Logging for detailed IOS codes supported.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...