Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Module question and sup720 and etherchannel

I would like to upgrade a catlyst6506 with a sup720-3B, I know that i need the highspeed fan and power supply's of minimum 2500W, I want to be sure that I can configure like this :

1/ I want to reuse the following module (WS-X6516A-GBIC) see next sh mod:

Mod Ports Card Type Model Serial No.

--- ----- -------------------------------------- ------------------ -----------

2 16 SFM-capable 16 port 1000mb GBIC WS-X6516A-GBIC SAL0808UJMD

Mod MAC addresses Hw Fw Sw Status

--- ---------------------------------- ------ ------------ ------------ -------

2 000f.241a.bd10 to 000f.241a.bd1f 3.0 7.2(1) 8.2(0.58)TFW Ok

Mod Online Diag Status

--- -------------------

2 Pass

2/ Can I make an etherchannel between this card and a WS-X6148A-GE-45AF to a catalyst 4506 module "WS-X4548-GB-RJ45"

Thanks,

Peter

3 REPLIES
Hall of Fame Super Blue

Re: Module question and sup720 and etherchannel

Hi Peter

1) The Sup720 will support this module.

2) Yes you should be fine creating an etherchannel using ports from both modules.

Please see this link for the full restrictions and guidelines for configuring etherchannel on 6500 switches.

http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/ios/12.2SXF/native/configuration/guide/channel.html#wp1020420

HTH

Jon

Hall of Fame Super Blue

Re: Module question and sup720 and etherchannel

Hi Peter

1) The Sup720 will support this module.

2) Yes you should be fine creating an etherchannel using ports from both modules.

Please see this link for the full restrictions and guidelines for configuring etherchannel on 6500 switches.

http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/ios/12.2SXF/native/configuration/guide/channel.html#wp1020420

HTH

Jon

New Member

Re: Module question and sup720 and etherchannel

Thanks Jon,

Do I have 2Gb/s full duplex (4GB/s) with this configuration ?

446
Views
4
Helpful
3
Replies
CreatePlease login to create content