Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

monitor a specific port

Dear all,

For the debugging purpose I need to save every communication from and to an ip address 10.10.10.20 connected to a cisco manageable switch. This pc is connected to fa0/10. For better debugging purpose I need the communication to a port no 675 only. How to get and save this communication to a file?

Waiting for your response,

Regards

Mero

Sent from Cisco Technical Support iPhone App

1 ACCEPTED SOLUTION

Accepted Solutions
Purple

monitor a specific port

Hi,

use SPAN to mirror all traffic from to this port where the machine is located then on the machine connected to destination SPAN port use  a capture filter for wireshark to only capture what you need.

Regards

Alain

Don't forget to rate helpful posts.

Don't forget to rate helpful posts.
3 REPLIES
New Member

monitor a specific port

You can go for a network tap .... and capture the traffic as you want.

New Member

Re: monitor a specific port

?????

Sent from Cisco Technical Support iPhone App

Purple

monitor a specific port

Hi,

use SPAN to mirror all traffic from to this port where the machine is located then on the machine connected to destination SPAN port use  a capture filter for wireshark to only capture what you need.

Regards

Alain

Don't forget to rate helpful posts.

Don't forget to rate helpful posts.
91
Views
0
Helpful
3
Replies
CreatePlease to create content