Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Monitor module in 7609-S

hi all,

do any1 knows, which command will be used to monitor snmp of module WS-X6748-SFP in 7609-S

i have proper snmp configuration in place but when my module went down, i got no laert in LMS3.0.1, instead i got alerts for access switches connected on that module

any help is appreciated

below is the config....on 7609

snmp-server engineID local xxxxxxxxxxxx
snmp-server group ABCD v3 auth notify *tv.FFFFFFFF.FFFFFFFF.FFFFFFFF.FFFFFFFF7F
snmp-server group EFGH v3 auth notify *tv.FFFFFFFF.FFFFFFFF.FFFFFFFF.FFFFFFFF0F access 10
snmp-server community readONLY RO
snmp-server trap-source Loopback10
snmp-server packetsize 1024
snmp-server queue-length 20
snmp-server location ABC

snmp-server contact XYZ

snmp-server enable traps snmp authentication linkdown linkup coldstart warmstart
snmp-server enable traps module
snmp-server enable traps tty
snmp-server enable traps bgp
snmp-server enable traps config
snmp-server enable traps hsrp
snmp-server enable traps bridge newroot topologychange
snmp-server enable traps syslog
snmp-server enable traps flash insertion removal
snmp-server enable traps entity
snmp-server enable traps cpu threshold
snmp-server enable traps vtp
snmp-server enable traps vlancreate
snmp-server enable traps vlandelete
snmp-server enable traps envmon fan shutdown supply temperature status
snmp-server host xx.xx.xx.22 vrf MANAGEMENT version 3 auth admin
snmp-server host xx.xx.xx.21 vrf MANAGEMENT readONLY

564
Views
0
Helpful
0
Replies