Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

Monitor session/ERSPAN shutdown

This happened after upgrading our 6509-E with a new sup 720 10G.  How can I do a " no shut" on the monitor sessions?  Thanks!

-----------------------------------------------------------------------------

monitor session 1 source vlan 700 - 706 , 888
monitor session 1 destination interface Gi7/38
monitor session 2 type erspan-destination
shutdown
description Knoah_Call_Recording
destination interface Gi7/13
source
  erspan-id 1
  ip address 10.88.127.4

monitor session 3 type erspan-source
shutdown
source interface Gi7/27 , Gi7/33 - 34
destination
  erspan-id 1
  ip address 10.88.127.4
  origin ip address 10.88.127.5

1 REPLY
New Member

Re: Monitor session/ERSPAN shutdown

I had figured it out.  Config t > monitor session 2 type erspan-destination > no shut.  Same for the other sessions.

495
Views
0
Helpful
1
Replies
CreatePlease to create content