We have a Catalyst 6509 ( IOS version is 12.1.27.E4 ). I alreay setup a monitor session, the source is a Gigabit port ( switch port at slot 9:WS-X6408A-GBIC ), it work fine. I tried to change source of this monitor session to another 2 Gigabit ports ( switch ports at slot 8:WS-X6816-GBIC. I also have WS-X6500-SFM2 at slot 5. The sum of network utilization in these 2 ports are almost equal with original monitor session source port ). After I changed immediately, my Catalyst 6509 have some error messages ans slot 8 reset :
*Oct 8 11:33:37.987: %CPU_MONITOR-SP-6-NOT_HEARD: CPU_MONITOR messages have not been heard for 30 seconds [8/0]
*Oct 8 11:34:07.999: %CPU_MONITOR-SP-6-NOT_HEARD: CPU_MONITOR messages have not been heard for 60 seconds [8/0]
*Oct 8 11:34:37.999: %CPU_MONITOR-SP-6-NOT_HEARD: CPU_MONITOR messages have not been heard for 90 seconds [8/0]
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.