Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Monitoring of Gigaports on 4006

Can the Gigaport interfaces be monitored on a 4006 (Sup 3)

e.g. Gigaport10(Gi5/11,5/13,5/15,5/17)

so we can tell if ports are going to get oversubscribed??

2 REPLIES

Re: Monitoring of Gigaports on 4006

Hi,

What you can do is enable SNMP on your switch and then use a NMS to monitor the interfaces on the switch after you add it to the NMS.

You'll need to configure an SNMP string.

Hope this helps...

Regards,

AbhisheK

Please rate helpful posts!!!

New Member

Re: Monitoring of Gigaports on 4006

Not really helpful.

We already monitor all ports via snmp.

Want to find out if you can monitor the gigaport interface - this is a group of ports on a 10/100/1000 interface card. The group of ports share 1G. What to monitor this so we can see if switch ports are likely to drop traffic do to oversubscription of the gigaport interface.

Gigaport10(Gi5/11,5/13,5/15,5/17) Hardware Mac State

Mac Link State : Up

114
Views
0
Helpful
2
Replies
CreatePlease login to create content