Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Monitoring queue depth and drops

Is there a mib that contains queue information (depth & drops) per COS to queue mapping. This IOS 12.2(33)SXH4 command provides that info (show queueing interface gig 4/43) but I'd like to poll via SNMP if possible. Thxs.

2 REPLIES
Bronze

Re: Monitoring queue depth and drops

New Member

Re: Monitoring queue depth and drops

This mib doesn't appear to supply the queue info I'm looking for - see details below. Is there another mib that might contains info for WRR queues or am I misinterpreting the cisco-queue-mib info? Thanks, paul

Details:

The Cisoc-QUEUE-MIB says it follows the interfaces mib (for indexing I presume). Here is what I see when looking at one interface.

From the interfaces MIB:

IF-MIB::ifDescr.187 = STRING: GigabitEthernet4/43

Using '187' as the index, here is the queue info that the Cisco-QUEUE-MIB returns:

SNMPv2-SMI::enterprises.9.9.37.1.1.1.1.187 = INTEGER: 1 cQIfQType

The available types are:

1 = fifo

2 = priority

3 = custom

4 = weightedFair

NOTE: none of these appear to match WRR which is what gig 4/43 is configured as.

SNMPv2-SMI::enterprises.9.9.37.1.1.1.2.187 = INTEGER: 0 cQIfTxLimit

SNMPv2-SMI::enterprises.9.9.37.1.1.1.3.187 = INTEGER: 1 cQIfSubqueues

SNMPv2-SMI::enterprises.9.9.37.1.2.1.2.187.2 = Gauge32: 0 cQStatsDepth

SNMPv2-SMI::enterprises.9.9.37.1.2.1.3.187.2 = INTEGER: 40 cQStatsMaxDepth

SNMPv2-SMI::enterprises.9.9.37.1.2.1.4.187.2 = Counter32: 0 cQStatsDiscards

Here is a snippet of the output from the 'show queueing interface gig 4/43 command:

--- ------------------

show queueing interface gig 4/43

Interface GigabitEthernet4/43 queueing strategy: Weighted Round-Robin

Port QoS is enabled

Port is untrusted

Extend trust state: not trusted [COS = 0]

Default COS is 0

Queueing Mode In Tx direction: mode-cos

Transmit queues [type = 1p3q8t]:

Queue Id Scheduling Num of thresholds

-----------------------------------------

01 WRR 08

02 WRR 08

03 WRR 08

04 Priority 01

queue thresh cos-map

---------------------------------------

1 1 0

1 2 1

1 3

1 4

1 5

1 6

1 7

1 8

2 1 2

2 2 3 4

2 3

2 4

2 5

2 6

2 7

2 8

3 1 6 7

3 2

3 3

3 4

3 5

3 6

3 7

3 8

4 1 5

Packets dropped on Transmit:

BPDU packets: 0

queue thresh dropped [cos-map]

---------------------------------------------------

1 1 1594515 [0 ]

1 2 0 [1 ]

2 1 0 [2 ]

2 2 0 [3 4 ]

3 1 0 [6 7 ]

4 1 0 [5 ]

701
Views
0
Helpful
2
Replies