Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

rvv
New Member

More than 50% bandwith to priority queue?

Hi experts!

It is possible to get more than 50% bandwith to egrees priority queue?

i mean when i use:

"srr-queue bandwith shape x 0 0 0"

x can't be < 2.

This means that i got only 1/2 of bandwith to priority queue.

But i have 3 different types of traffic.

Voice need 90%, and 2 other 5% and 5%.

If i use "priority queue out" does it mean that i'am not guarantee 10% of bandwith to other 2 queues?

How to achive my config, without use

"srr-queue bandwith share x y z w"?

2 REPLIES

Re: More than 50% bandwith to priority queue?

Hi

You concept is correct . But having 90% as a priority traffic is just like a FIFO queuing and priority queuing is not going to help you.

Is that you are applying the srr-queue in a Ethernet or a Fast ethernet interface . How much is your priority traffic in terms of Mb

regards

vanesh k

rvv
New Member

Re: More than 50% bandwith to priority queue?

i have 100Mb FastEthernet interface shaped to 50Mb with "srr-queue bandwith limit 50".

I need 1Mb and 5Mb for signaling traffic.

And i need to guarantee this.

And all other bandwith for voice.

And Voice is high priority for jiteer, packet loss ... etc.

117
Views
0
Helpful
2
Replies