Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Moving interface to another VDC nexus 7k

Hello,

I was trying to move a interface from a VDC to another.

Found the document: http://www.cisco.com/en/US/docs/switches/datacenter/sw/nx-os/virtual_device_context/configuration/guide/vdc_mgmt.html#wp1170127

And tryed to remove from VDC.

When I was trying to do it couldn´t remove it.

     (config-vdc)# no allocate ?

       fcoe-vlan-range  Vlans reserved for FCoE

       shared           Shared this port using the reserved FCoE vlans

I can allocate interfaces.

(config-vdc)# allocate interface ethernet ?

  <1-253>  Slot/chassis number (config-vdc)# allocate interface ethernet ?
  <1-253>  Slot/chassis number

I was looking for some info at foruns and I saw something about type of modules, but looks like one F2 type have problems. Also checked the user-role and I have network-admin.

This is the output of show module:

Mod  Ports  Module-Type                                       Model              Status

---      -----    -----------------------------------                      ------------------ ----------

1       32     10 Gbps Ethernet XL Module                N7K-M132XP-12L     ok

2       48     1000 Mbps Optical Ethernet XL Modul   N7K-M148GS-11L     ok

3       48     10/100/1000 Mbps Ethernet XL Module  N7K-M148GT-11L     ok

4       48     10/100/1000 Mbps Ethernet XL Module  N7K-M148GT-11L     ok

I want to move Ethernet3/32.

This is the source VDC:

vdc nanme id 2
  allocate interface Ethernet1/1,Ethernet1/3,Ethernet1/5,Ethernet1/7
  allocate interface Ethernet2/1-4
  allocate interface Ethernet3/1-2,Ethernet3/32
  boot-order 1
  limit-resource vlan minimum 16 maximum 4094
  limit-resource monitor-session minimum 0 maximum 2
  limit-resource monitor-session-erspan-dst minimum 0 maximum 23
  limit-resource vrf minimum 2 maximum 1000
  limit-resource port-channel minimum 0 maximum 768
  limit-resource u4route-mem minimum 8 maximum 8
  limit-resource u6route-mem minimum 4 maximum 4
  limit-resource m4route-mem minimum 8 maximum 8
  limit-resource m6route-mem minimum 5 maximum 5

This is the destination VDC:

vdc name id 4

  allocate interface Ethernet1/17-32

  allocate interface Ethernet2/9-12

  allocate interface Ethernet3/3,Ethernet3/9-30

  boot-order 1

  limit-resource vlan minimum 16 maximum 4094

  limit-resource monitor-session minimum 0 maximum 2

  limit-resource monitor-session-erspan-dst minimum 0 maximum 23

  limit-resource vrf minimum 2 maximum 1000

  limit-resource port-channel minimum 0 maximum 768

  limit-resource u4route-mem minimum 8 maximum 8

  limit-resource u6route-mem minimum 4 maximum 4

  limit-resource m4route-mem minimum 8 maximum 8

  limit-resource m6route-mem minimum 5 maximum 5

I tryed to use allocate with "shared" but it didn´t work. All intertafaces looks like "ok" on membership status.

1 ACCEPTED SOLUTION

Accepted Solutions
VIP Super Bronze

Moving interface to another VDC nexus 7k

Hi,

In order to move/add ports from one VDC to another, you would need to be in admin VDC.

HTH

2 REPLIES
VIP Super Bronze

Moving interface to another VDC nexus 7k

Hi,

In order to move/add ports from one VDC to another, you would need to be in admin VDC.

HTH

New Member

Moving interface to another VDC nexus 7k

Now I understood what I´ve done wrong...
We have 4 VDCs. On my mind first (ID 1) should be admin and it was default vdc.
Now I will look how to change it to Admin-VDC.

Thanks.

650
Views
0
Helpful
2
Replies
CreatePlease login to create content