12-06-2013 01:34 AM - edited 03-07-2019 04:57 PM
We have two sides we have configured iBGP between the two sides and there are same VRF's working on both sides , for which we want communication to work
also there are few static routes and ospf on each vrf . on each sides .
when we configure mp-bgp and put below commands the static and ospf communcation , do we need too put commands redistribute static and redistribute ospf , i have been suggested if we do so there is possibilty of black hole . do advise
address-family ipv4 vrf VRF_A
redistribute connected
exit-address-family
Solved! Go to Solution.
12-06-2013 01:40 AM
there is no two way redistribution rt?
so you can go ahead... else tag the traffic while redistributing and filter the same
12-06-2013 01:40 AM
there is no two way redistribution rt?
so you can go ahead... else tag the traffic while redistributing and filter the same
12-06-2013 01:57 AM
Thanks for reply Sharon , BGP is already getting redistributed in OSPF , so I think I cannot redistribute OSPF in BGP . But I still can redistribute static to mp-BGP.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: