Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

MPLS

I need to understand the concepts and configuration for MPLS.Kindly let me know the link which helps me better understanding.

Thanks in advance.

3 REPLIES

Re: MPLS

Hi,

MPLS stands for Multi Protocol Label Switching, its a way of switching packets based on labels (fast way of packet switching on backbones, plus the extra available features that it introduces), review this document and it'll supply you with the elementary facts:

http://www.cisco.com/en/US/tech/tk436/tk428/technologies_q_and_a_item09186a00800949e5.shtml

And for more details:

http://www.cisco.com/en/US/tech/tk436/tk428/tsd_technology_support_protocol_home.html

[edit] There is also a fine book that you can really depend on:

Cisco Press MPLS Fundamentals by Luc De Ghein, CCIE No. 1897

HTH,

Mohammed Mahmoud.

Silver

Re: MPLS

read the documents Mohammed provided, but please beware of it's complexity before deploying it in production environment. Meaning you should really know the purpose of why you want it and be able to understand what is going on.

Re: MPLS

HI Kumar, [PLS rate if HELPS]

MPLS is a packet-forwarding technology which uses labels to make data forwarding decisions. With MPLS, the Layer 3 header analysis is done just once (when the packet enters the MPLS domain).

In addition to above all the Post, pls refer link below:

http://www.cisco.com/en/US/tech/tk436/tk428/tsd_technology_support_protocol_home.html

PLS RATE if HELPS

Best Regards,

Guru Prasad R

112
Views
0
Helpful
3
Replies