We are trying to get the latest version of MRTG to graph our I/O but it does not want to seem to cooperate. I have tried using snmp v2 and v3 so that it would use 64 bit counters, but that still does not seem to work. The switch transfer rate is not being graphed properly on MRTG. Has anyone else had this problem and fixed it? Any help would be greatly appreciated, thank you.
Resolved the issue. It took a lot of trials before we hit the combination of mrtg parmaters for the cfgmaker that worked and now the results more accurately reflect what the interface stats show over a 5 minute average. Beware of MRTG on high speed interfaces (like Gb-10Gb and up). By default MRTG will not be giving you accurate results even with SNMP V2 without modifying parms on the app.
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...