Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

MSFC 1 lost IOS - Xmodem not working

My 6506 sup1a with MSFC goes into Route Processor Ronmon. I believe the MSFC boot image is corrupt while updating.

Trying to use the xmodem -s9600 -c and transfer the 1.8 meg file using the console port. It starts tranferring then hangs, i am using hyperterminal and the send window ( packets and update status freezes and then dissappears after approx 2 minutes). I have tried another laptop with the same results.

Can anyone suggest another solution.

1 REPLY
New Member

Re: MSFC 1 lost IOS - Xmodem not working

Problem now fixed.

instead of loading the Switch processor with a c6supp11 image i decided to load from pcmcia slot0: a cat600-sup6.1 image , it then went into Route processor Ronmon where i could download the 1.8meg 6msfc boot image without a problem.

After that i had to format the bootflash: and then copy from slot0: using the emergency-download command (hidden option).

160
Views
0
Helpful
1
Replies