hi all,
i want to know on cat os 6509 msfc is plugged on the supe engine in slot1 then
why it shows on sh mod that it is on module 15?
(enable) sh mod
Mod Slot Ports Module-Type Model Sub Status
--- ---- ----- ------------------------- ------------------- --- --------
1 1 2 1000BaseX Supervisor WS-X6K-S2U-MSFC2 yes ok
15 1 1 Multilayer Switch Feature WS-F6K-MSFC2 no ok
3 3 16 1000BaseX Ethernet WS-X6516-GBIC no ok
4 4 16 1000BaseX Ethernet WS-X6516-GBIC no ok
5 5 48 10/100BaseTX Ethernet WS-X6348-RJ-45 yes ok
6 6 16 1000BaseX Ethernet WS-X6516-GBIC no ok
Mod Module-Name Serial-Num
--- -------------------- -----------
1 SAL0605HFG1
15 SAL06090N1R
3 SAL0706CRDB
4 SAL0706CTHW
5 SAL0652APS7
6 SAL0807UFW1
Mod MAC-Address(es) Hw Fw Sw
--- -------------------------------------- ------ ---------- -----------------
1 00-06-d6-5a-a5-d6 to 00-06-d6-5a-a5-d7 3.10 7.1(1) 8.5(9)
00-06-d6-5a-a5-d4 to 00-06-d6-5a-a5-d5
00-0b-60-f6-80-40 to 00-0b-60-f6-84-3f
15 00-09-b7-95-32-40 to 00-09-b7-95-32-7f 2.4 12.1(27b)E 12.1(27b)E1
3 00-06-d6-5c-81-78 to 00-06-d6-5c-81-87 5.3 6.3(1) 8.5(9)
4 00-06-d6-5c-80-c8 to 00-06-d6-5c-80-d7 5.3 6.3(1) 8.5(9)
5 00-0b-be-d3-e1-20 to 00-0b-be-d3-e1-4f 6.2 5.4(2) 8.5(9)
6 00-0f-24-1a-90-d0 to 00-0f-24-1a-90-df 5.5 6.3(1) 8.5(9)
Mod Sub-Type Sub-Model Sub-Serial Sub-Hw Sub-Sw
--- ----------------------- ------------------- ----------- ------ ------
1 L3 Switching Engine II WS-F6K-PFC2 SAL06121ALJ 3.2
5 Inline Power Module WS-F6K-VPWR 2.0 1.1(1)
many thanks
mahesh
