Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Community Member

MSFC temperature

I have this from sh

sh env temp

Intake Exhaust Device 1 Device 2

Slot Temperature Temperature Temperature Temperature

--------------- --------------- --------------- --------------- ---------------

1 36C(50C,65C) 49C(60C,75C) 50C 37C

3 41C(50C,65C) 41C(60C,75C) N/A N/A

4 39C(55C,65C) 42C(55C,70C) 40C(50C,65C) 39C(50C,65C)

5 38C(50C,65C) 38C(60C,75C) N/A N/A

1 (Switch-Eng) 45C(50C,65C) 52C(60C,75C) N/A N/A

1 (MSFC) 50C(50C,65C) 51C(60C,75C) N/A N/A

Chassis Modules

---------------------

VTT1: 36C(100C,115C)

VTT2: 40C(100C,115C)

VTT3: 40C(100C,115C)

Can some one expalin me what al this mean

As i have alarm here

sh mod 1

Mod Slot Ports Module-Type Model Sub Status

--- ---- ----- ------------------------- ------------------- --- --------

1 1 2 1000BaseX Supervisor WS-X6K-SUP2-2GE yes temp-minor

Mod Module-Name Serial-Num

--- -------------------- -----------

1 SAL09063BVJ

Mod MAC-Address(es) Hw Fw Sw

--- -------------------------------------- ------ ---------- -----------------

1 00-09-12-58-6c-ca to 00-09-12-58-6c-cb 5.1 7.1(1) 8.5(2)

00-09-12-58-6c-c8 to 00-09-12-58-6c-c9

00-11-bc-bc-34-00 to 00-11-bc-bc-37-ff

Mod Sub-Type Sub-Model Sub-Serial Sub-Hw Sub-Sw

--- ----------------------- ------------------- ----------- ------ ------

1 L3 Switching Engine II WS-F6K-PFC2 SAL09063D4H 3.5

sh mod 15

Mod Slot Ports Module-Type Model Sub Status

--- ---- ----- ------------------------- ------------------- --- --------

15 1 1 Multilayer Switch Feature WS-F6K-MSFC2 no temp-minor

Mod Module-Name Serial-Num

--- -------------------- -----------

15 SAL09063FMC

Mod MAC-Address(es) Hw Fw Sw

--- -------------------------------------- ------ ---------- -----------------

15 00-13-19-f1-97-40 to 00-13-19-f1-97-7f 2.8 12.1(26)E5 12.1(26)E5

1 REPLY
Community Member

Re: MSFC temperature

Also i have this alarm

sh system

PS1-Status PS2-Status

---------- ----------

ok ok

Fan-Status Temp-Alarm Sys-Status Uptime d,h:m:s Logout

---------- ---------- ---------- -------------- ---------

ok warning faulty 160,11:53:05 20 min

PS1-Type PS2-Type

-------------------- --------------------

WS-CAC-2500W WS-CAC-2500W

Modem Baud Backplane-Traffic Peak Peak-Time

------- ----- ----------------- ---- ------------------------

disable 9600 0% 15% Wed Jan 23 2008, 21:00:35

PS1 Capacity: 1153.32 Watts ( 27.46 Amps @42V)

PS2 Capacity: 1153.32 Watts ( 27.46 Amps @42V)

PS Configuration : PS1 and PS2 in Redundant Configuration.

240
Views
0
Helpful
1
Replies
CreatePlease to create content