I hv an issue with MST on 3550 switches, i have connected three 3550 swithces in a triangle topology..sw1->sw2->sw3->sw1. sw1 is the root bridge for vlan 10 - 60 but when i configured sw2 and sw3 as MST now sw2 becomes the root bridge even though it's BID is larger than sw1 (Root Bridge)
This document gives several answers on frequently asked questions for PFRv3 channel state behavior.
Q1: What are all the channel operational states from a BR (border role) perspective and what are the rules/conditions to be in each st...
The need was to reach an host inside a LAN through a VPN connection managed by the LAN gateway (Cisco 1921).
The LAN gateway performs NAT and there was a dedicate nat rule for the host i wanted to reach through VPN.
I couldn't connect to the hos...
We have 3 identical switches configured by someone else and would like to claim some of the Gigabit ports(G1/G2/G3/G4) for use on servers. When we try to change the wiring and configuration, we run in to connectivity issues. Attached is a des...