Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

MTU on 3560

Is it possible modify the MTU (per interface) on the 3560 EMI switches? If not per interface, is it possible at least as global command? (C3560-IPSERVICESK9-M), Version 12.2(25)SEE2)

1 ACCEPTED SOLUTION

Accepted Solutions

Re: MTU on 3560

Hi,

You can set the mtu globally with the "system mtu" command - but best to read the entry in the command reference first because there are a number of caveats (like having to reset the switch if you change it).

HTH

Andrew.

2 REPLIES

Re: MTU on 3560

Hi,

You can set the mtu globally with the "system mtu" command - but best to read the entry in the command reference first because there are a number of caveats (like having to reset the switch if you change it).

HTH

Andrew.

Re: MTU on 3560

http://www.cisco.com/en/US/products/hw/switches/ps5528/products_configuration_guide_chapter09186a0080774224.html#wp1154596

take a look on this link you can change the system MTU...

rate this post if it helps

regards

Devang

763
Views
5
Helpful
2
Replies
CreatePlease login to create content