01-29-2007 08:27 AM - edited 03-05-2019 02:02 PM
Is it possible modify the MTU (per interface) on the 3560 EMI switches? If not per interface, is it possible at least as global command? (C3560-IPSERVICESK9-M), Version 12.2(25)SEE2)
Solved! Go to Solution.
01-29-2007 08:57 AM
Hi,
You can set the mtu globally with the "system mtu" command - but best to read the entry in the command reference first because there are a number of caveats (like having to reset the switch if you change it).
HTH
Andrew.
01-29-2007 08:57 AM
Hi,
You can set the mtu globally with the "system mtu" command - but best to read the entry in the command reference first because there are a number of caveats (like having to reset the switch if you change it).
HTH
Andrew.
01-29-2007 09:07 AM
take a look on this link you can change the system MTU...
rate this post if it helps
regards
Devang
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide