Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

MULTI WAN IPs with different gateways on single router interface

i,I have two Public wan Ips one is 1.1.1.1/30 and other with 2.2.2.2/29,now i have nattted 1.1.1.1/30 for LAn segment,I want to use the other block 2.2.2.2/29 for video conferencing service with natting/patting ,the limitations is that i have one ISP media connected to my cisco 2911 router ,how can I manage both IPs(especially the 2.2.2.2/29 with their different gateways over a single Wan link(from ISP to the Router),without nating for video conference server.(video conference server needs to be ssigned public ip from block 2.2.2.2/29)
 

(VIdeo conference is not on natted IP)

Everyone's tags (1)
2 REPLIES
VIP Super Bronze

Your first statement is

Your first statement is confusing.  You say:

<i,I have two Public wan Ips one is 1.1.1.1/30 and other with 2.2.2.2/29,now i have nattted 1.1.1.1/29 for LAn segment>

So, is 1.1.1.1 a /30 or /29?

If it is a /30 is it used for peering between you and your provider or you are using a different segment for peering and both 1.1.1.1 and 2.2.2.2 are /29s assign to you?

Can you clarify?

HTH

 

 

 

New Member

Thankx for rep Reza..

Thankx for rep Reza...correction it is 1.1.1.1/30 and other 2.2.2.2/29....

only 1.1.1.1/30 is natted the other 2.2.2.2/29 is not to  be natted....

the point that is isp media link is single and these two wan ips exsist on it as primary and secondary ips with their own gateways i.e for 1.1.1.1/30  gateway is 1.1.1.1 and for 2.2.2.2/29 gateway is 2.2.2.1.

 

Interface g0/0 is wan(facing ISP)...

interface g02 is LAN(natted 1.1.1.1/30 into 192.168.0.0/16)

 

interface g0/1 is for video conference facility to use any ip from 2.2.2.2/29......

121
Views
0
Helpful
2
Replies
CreatePlease to create content