Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

multicast and RP

We enabled multicast routing in our corporate network "Cat 6509 with SUP 720" and I configured the loopback on Cat 6509 as rp-address "ip pim rp-address loopback0" and the msdp peer the loopback of the other cat 6509 "we have two" "ip msdp peer loopback0_of_the other cat6509".

am I wright or wrong ?

Thanks

1 REPLY
Cisco Employee

Re: multicast and RP

Tayeb,

Here's a good link explaining how to configure anycast RP.

http://www.cisco.com/en/US/docs/ios/solutions_docs/ip_multicast/White_papers/anycast.html

Regards,

Harold Ritter
Sr. Technical Leader
CCIE 4168 (R&S, SP)
harold@cisco.com
México móvil: +52 1 55 8312 4915
Cisco México 
Paseo de la Reforma 222 Piso 19
Cuauhtémoc, Juárez
Ciudad de México, 06600
México
120
Views
0
Helpful
1
Replies