Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Multicast configuration

Hello,

I just made a multicast on my cisco 6500 switch, and making transport to another location via trunk. so i made a vlan with set of ip's 192.168.222.0/24

and transport the multicast to the other switch 2950.

Now my switch 6500 is going to 100% cpu utilazation.

any help please?

my config on 6500:

ip multicast-routing

interface Vlan222

ip address 192.168.222.1 255.255.255.0

ip pim sparse-mode

and joined 3 interfaces to the vlan.

regards

2 REPLIES
VIP Purple

Multicast configuration

New Member

Multicast configuration

Thank you for your answer, but i already read that, and did'nt help me.

Ok, now i just figured this:

When i use 192.168.0.1 255.255.255.0 fot the vlan network the CPU goes down to 1-2% usage. Then when i try ip 192.16.8.222.1 255 255 255.0 the cpu goes to 10-15% usage, then when i try any set of public ip's on the vlan i get the CPU usage to 99-100% usage.

i don't know how to fix that!

Any ideas please?

115
Views
0
Helpful
2
Replies
CreatePlease login to create content