Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Multicast - Question about "sh ip mroute" command output

Hi,

I don't really understand the meaning/reason of "stopped" word in the output of "sh ip mrotue" command.

Here is the result for 2 groups on a router, one with remaining time for the expire time and the other, the word "stopped"

(*, 239.255.255.254), 1d11h/00:02:43, RP 0.0.0.0, flags: DC

  Incoming interface: Null, RPF nbr 0.0.0.0

  Outgoing interface list:

    Vlan15, Forward/Sparse-Dense, 00:04:21/00:00:00

    Vlan16, Forward/Sparse-Dense, 14:44:20/00:00:00

    TenGigabitEthernet6/4, Forward/Sparse-Dense, 1d11h/00:00:00

    TenGigabitEthernet5/4, Forward/Sparse-Dense, 1d11h/00:00:00

(*, 239.255.255.253), 7w0d/stopped, RP 0.0.0.0, flags: DC

  Incoming interface: Null, RPF nbr 0.0.0.0

  Outgoing interface list:

    Vlan15, Forward/Sparse-Dense, 00:00:19/00:00:00

    Vlan16, Forward/Sparse-Dense, 00:01:13/00:00:00

    GigabitEthernet1/1.1, Forward/Sparse-Dense, 00:01:22/00:00:00

    Vlan13, Forward/Sparse-Dense, 00:02:22/00:00:00

Cisco indicates, but for the commond "sh ip igmp group":

"The word "stopped"  indicates that timing out of  this entry is not determined by this  expire timer. If the router is in  INCLUDE mode for a group, then the  whole group entry will time out after  the last source entry has timed  out (unless the mode is changed to  EXCLUDE mode before it times out). "

But my groups are all in EXCLUDE mode:

#sh ip igmp group 239.255.255.253 detail

Flags: L - Local, U - User, SG - Static Group, VG - Virtual Group,

       SS - Static Source, VS - Virtual Source,

       Ac - Group accounted towards access control limit

Interface:      Vlan15

Group:          239.255.255.253

Flags:

Uptime:         00:00:00

Group mode:     EXCLUDE (Expires: 00:02:59)

Last reporter:  10.10.1.1

Source list is empty

Thanks for your help

P.

Everyone's tags (6)
829
Views
0
Helpful
0
Replies
CreatePlease to create content