Multicast traffic destined to a multicast MAC address, Only routers enabled multicast routing protocol can be member of this multicast MAC addresses and receive the traffic and do multicast routing. Non-multicast routers will drop the multicast packets at the layer2 itselft.
Yep, there are various multicast routing protocol. To enable multicast, in the global configuration mode you have to give ip multicast-routing...Rest of the configuration is depend upon the routing protocol you choose
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...