Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Multicast Routing "PIM" cant escape local vlan

Hello

I have a multicast problem and as I understand it I have multicast setup correctly.  Basically I have a multicast server, a VLC server udp multicasting a mp3 file, but the traffic can’t escape the local vlan even though ip pim sparse mode is setup.  The rendezvous point is on the vlan that one of the receivers is on.

I’m lost as to why the traffic can’t escape its own vlan.    Attached is a picture of the layout.

Any help is greatly appreciated.

e-

Everyone's tags (3)
1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Blue

Re: Multicast Routing "PIM" cant escape local vlan

Eric

Check that multicast ttl is set to > 1 as it needs to be to go across vlans. You set this within VLC GUI.

Jon

2 REPLIES
Hall of Fame Super Blue

Re: Multicast Routing "PIM" cant escape local vlan

Eric

Check that multicast ttl is set to > 1 as it needs to be to go across vlans. You set this within VLC GUI.

Jon

Anonymous
N/A

Re: Multicast Routing "PIM" cant escape local vlan

That was it, thanks Jon.

e-

1172
Views
5
Helpful
2
Replies