Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

Multicast: Set s,g cache timeout

Device:  asr9k

Software: 4.2.1

show mrib route....

.....

(11.0.3.18,225.0.15.175) RPF nbr: 11.0.3.18 Flags:

  Up: 13:16:35

  Incoming Interface List

    GigabitEthernet0/1/0/10.100 Flags: A, Up: 13:16:35

(11.0.3.18,225.0.15.176) RPF nbr: 11.0.3.18 Flags:

  Up: 13:16:35

  Incoming Interface List

    GigabitEthernet0/1/0/10.100 Flags: A, Up: 13:16:35

(11.0.3.18,225.0.15.177) RPF nbr: 11.0.3.18 Flags:

  Up: 13:16:35

  Incoming Interface List

    GigabitEthernet0/1/0/10.100 Flags: A, Up: 13:16:35

....

I was looking through the ios-xr documentation to see if there was a way to set the cache timeout for an S,G entry.  These entries, its been 8+ hours since any traffic was sent to them and there are no longer any olist of interest.

Best regards and thanks,

John

Everyone's tags (3)
291
Views
0
Helpful
0
Replies
CreatePlease to create content