Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Multilink L2TP with 3620 as CPE and 7204 VXR/NPE400 as LNS ?

Hello,

I am trying to create a solution to aggregate bandwith using several SHDSL that have ethernet ends to get more bandwith and more stability.

Customers ends are SHDSL to Ethernet modems, my end is VP/VC bridged to one or more VLAM using a RAD.

I have already a LNS which is a 7204VXR with NPE400 so l2tp final tunnels are ok, as well as Radius part also.

Now I have to find a good solution to handle serveral links in parallel to have more bandwith and also stablity against telco woes (eg dslam problems, etc...).

Have you got a solution for that or any good pointers ?

Many thanks....

1 REPLY
Bronze

Re: Multilink L2TP with 3620 as CPE and 7204 VXR/NPE400 as LNS ?

Try MLP bundling. When more bandwidth is needed, additional links can be added to the bundle by simply configuring them as members of the bundle.

http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122newft//122limit/122y/122yn8/ft_ipqos.htm#44359

126
Views
0
Helpful
1
Replies