Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Multilink with QoS

Not sure if this is under the right spot or not ...

I have a PPP multilink running on 3845's. There are 3 T-1's in the multilink, and under the multilink interface a service policy is set. On the serial interface configurations, the fair-queue option is there. My questions is, is this option negating the service policy, or should the service policy output command be under every serial interface in the multilink? thanks for any help.

sample config:

interface Multilink5

ip address x.x.x.x x.x.x.x

ppp multilink

ppp multilink group 5

service-policy output test

interface Serial0/1/0

no ip address

encapsulation ppp

fair-queue

ppp multilink

ppp multilink group 5

2 REPLIES
Hall of Fame Super Blue

Re: Multilink with QoS

Derek

The service-policy should be applied to the multilink interface and not to each individual physical interface so your setup is correct.

Jon

New Member

Re: Multilink with QoS

Thanks Jon. So the fair-queue command on the serial interfaces is not negating anything?

355
Views
0
Helpful
2
Replies
CreatePlease to create content